John Lewis JLFSMC613 Instrukcja Użytkownika Pobierz pdf (Strona 37)

2. Light one of the hob burners.

3. Close the lid. There should be no gas supply

to the hob burners. The burner goes out.

4. Turn the burner off and lift the lid. The gas

supply should be restored to the hob

burners, when you turn the knob on.

Electrical installation

Warning! Only a qualified and

competent person must do the

electrical installation.

The manufacturer is not responsible if

you do not follow safety precautions

from the chapter "Safety information".

This appliance is supplied without a main plug or

a main cable.

Covering terminal board

The recommended cross-section area is six

square millimetres (6 mm²).

When you refit the mains terminal cover, make

sure that the lower tabs are located inside the

bottom edge of the aperture, before you fix the

two screws into the top edge of the mains

terminal cover.

Make sure that the cover is securely fastened.

To open the cover of terminal board

obey the procedure in opposite

sequence.

Terminal board

Make sure that the links are fitted as shown.

NNNLL

Do not remove blanking plates.

MANUFACTURER:

ELECTROLUX POLAND Sp.z o.o..

ul.Kazimierza Odnowiciela 28

58-100 Świdnica - POLAND

Cooker user manual 37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Komentarze do niniejszej Instrukcji

Brak uwag