John Lewis SBSKITB Instrukcja Użytkownika

SBSKITBSide by SideInstruction manual

10• «A» Fix the joining bracket with four 4.2x13 self-tapping screws (bag «3») respecting the holes in the sides.• The bracket must be positioned so t

11AB• «A» Regulate the front feet to level the appliance.Verify the position with a level.• «B» Lock the M8 nuts.

12• If necessary regulate the doors or only one single door, partially unscrew the hinge screws, related to thedoor to be adjusted, and move the hinge

13• Before proceeding with the assembly of the top remove the protective film.• «A» Position the top so that the bottom front part fits under the top

14• Fit the trim between the two units by pressing along the entire profile.

15• Before proceeding with the fixing of the kickplate remove the protective film.• Fit the kickplate so that the inner hook couples with the joining

16• Fix the front of the top and kickplate with M5x12 screws (bag «1»).

17• Before proceeding with the fixing of the side strip remove the protective film.• «A» Insert the front end of the side strip behind the kickplate.•

18ABC• Fit the three handles, following the alphabetical order of the figures.• The screws and grub screws are included in the handle-kit.• «A» Fix th

You should also ensure that air can circulate freely around the back and the top of the cabinet.Position the assembled Side by Side:• At least 50 mm f

2Important information• This Side by Side unit must only be installed by our authorised personnel.• Do not install the unit on your own or have unqual

John Lewis Partnership171 Victoria StreetLondon SW1E 5NNwww.johnlewis.com2221 055-1005/07

WRENCH 24 mmUSET SCREW WRENCH 4 mmYXLEVELVWTZHAMMERSCREW DRIVER PHILIPS 2SCREW DRIVER WRENCH 7 mmWRENCH 13 mm3Tools required for installation(not supp

4

58CONNECTION BRACKET2UPPER CONNECTION BRACKET6PLINTH5TOP PANEL34197LEFT SIDECUPHEAD SCREW M5x12 (bag 1 ) TOOL UHEXAGON-HEAD SCREW M5x18 (bag 2 ) TOOL

6REAR FOOT11FRONT FOOT TOOL X15HANDLE ASSEMBLEDWINE/FREEZER14HANDLE ASSEMBLEDCOOLER1213SCREW M6x20 HEXAGON SOCKET CONE TOOL Y1019MOUNTING BLOCK18171

7CD40mmAB• Carefully place the unit with packaging on its back.• Open the bottom part of packaging and remove the corner protection.• «A» Screw the M8

8Right side• Glue the spacer sponge on the right side of the wine cooler-freezer, respecting the distances indicated.

9CBA• Bring the units near to each other.• «A» If necessary adjust the front feet so that the units are both the same height.• «B» Insert the bottom